MIG Welder Overdue

This Welder comes with an attached kit that includes (until used): MIG Wire (Must be 030, "flux-core" / "shielded" .030 or .035 thickness), Tips (.030 or .035 depending on wire), Pliers for snipping wire.

Ground clamp and hose with nozzle should be attached.

If you use a lot of any material (or are last to use), please replace for the next person! Clean out nozzle with pliers after every use!!!

MUST use THICK welding gloves (NOT rubber) while using.

Shielded, Flux Core Arc Welder.

Welding output = 32 Volts DC

Can only weld up to 1/8 in thick mild steel. 

STEEL ONLY!